Pelican iM3410 Storm Long Case without Foam (Black)

Waterproof Storm Protector Long Case without Foam - Black

Lightweight, tough, and waterproof the iM3410 Storm Case is an HPX high performance resin, injection molded case from Pelican. It's tough design is almost unbreakable making the case dent-resistant, shatter-resistant and when closed fully, both airtight and watertight. A built-in waterproof gortex purge automatically regulates pressure changes inside the case ensuring the seal is never compromised. The five press and pull latches open with a push of a button but are extremely secure, remaining closed whether under extreme stress or impact. Extra security is added by four padlockable molded-in and reinforced hasps.

The lid is secured by five metal pin hinges; each hinge has an integrated foot that not only withstands impact stress but also provides a stable, flat surface for standing stability. Transport is easy with the inclusion of two integrated soft-grip handles, one for vertical and one for horizontal carrying positions. The case can also be conveniently rolled on two in-line wheels constructed of stainless steel ball bearings, heat resistant nylon, and polyurethane.

Features:

• Construction
• Injection molded HPX high performance resin
• Waterproof, crushproof and impact protected
• Five press and pull latches
• Valox PBT impact-resistant hinges
• Silicone sponge lid o-ring
• Gortex purge membrane
• Carrying Options
• Vertical and horizontal soft-grip carrying handles
• Two in-line wheels

Specifications:

• INTERIOR (L X W X D): 54.50" x 10.00" x 6.00" (138.4 x 25.4 x 15.2 cm)
• EXTERIOR (L X W X D): 57.74" x 12.71" x 6.67" (146.7 x 32.3 x 16.9 cm)
• BODY: Injection Molded HPX high performance resin
• LATCH: Valox - Polybutylene Terephthalate (PBT)
• LATCH (ALT): Xenoy - Polyester/Polycarbonate blend
• O-RING: Silicone Sponge
• PINS: Stainless Steel
• PINS (ALT): Aluminum
• FOAM: 1.3/1.35 polyester
• PURGE BODY: Valox - Polybutylene Terephthalate (PBT)
• PURGE BODY (ALT): Xenoy - Polyester/Polycarbonate blend
• PURGE VENT: Gortex membrane
• PURGE O-RING: Buna-N, 50-60 Durometer Shore A
• LID DEPTH: 2.00" (5.1 cm)
• BOTTOM DEPTH: 4.00" (10.2 cm)
• TOTAL DEPTH: 6" (15.2 cm)
• INT VOLUME: 1.89 ft³ (0.054 m³)
• WEIGHT WITH FOAM: 20.00 lbs (9.1 kg)
• WEIGHT WITHOUT FOAM: 18.00 lbs (8.2 kg)
• MINIMUM TEMPERATURE: -20° F (-29 ° C)
• MAXIMUM TEMPERATURE: 140° F (60 ° C)
• CERTIFICATIONS: MIL-STD-810F / ATA 300 / FED-STD-101C