DPA MMP-B Microphone Preamplifier, Low Cut and High Boost

Microphone Preamp 48V Standard Size with Lowcut and Highboost Filters Modular

Preamplifier with low cut and high boost filters.

Combine this preamp with any capsule in the DPA Reference Standard series.

Related article from the Microphone University: Impedance balancing with Active Drive vs transformer coupled outputs

Specifications:

• Output connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
• Low-cut frequency, -3 dB: 50 Hz
• Noise with shorted input, A-weighted: 1.1 V
• Output voltage, RMS: > 1.8 V
• Output voltage, peak: > 2.5 V
• Type of electronic circuit: Active
• THD@1VRMS, 1kHz: < 0.5 %
• Dynamic range: 124 dB
• Switchable filters: High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
• Output impedance: < 150 ohm
• Output balance principle: Signal balanced
• Common Mode Rejection Ratio (CMRR): > 40 dB
• Power supply (for full specifications): 48 V Phantom power (+/- 4 V)
• Current consumption: 4.5 mA
• Color: Matte black
• Weight: 38 g (1.3 oz)
• Diameter: 19 mm (0.75 in)
• Length: 99 mm (3.9 in)
• Cable drive capability: 100 m (328 ft)
• Temperature range: -40 C to 45 C (-40 F to 113 F)
• Relative Humidity (RH): Up to 90%