Description
Microphone Preamp 48V Standard Size Modular
Ultra transparent transformerless preamplifier with active drive for impedance balancing.
Combine this preamp with any capsule in the DPA Reference Standard series.
Related article from the Microphone University: Impedance balancing with Active Drive vs transformer coupled outputs
Specifications:
- Output connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Low-cut frequency, -3 dB: 8 Hz
- Noise with shorted input, A-weighted: 0.5 V
- Output voltage, RMS: > 5 V
- Output voltage, peak: > 16 V
- Type of electronic circuit: Active
- THD@1VRMS, 1kHz: < 0.2 %
- Dynamic range: 138 dB
- Switchable attenuator: 0 dB, -20 dB
- Output impedance: < 200 ohm
- Output balance principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): > 60 dB
- Power supply (for full specifications): 48 V Phantom power (+/- 4 V)
- Current consumption: 2.8 mA
- Color: Matte black
- Weight: 140 g (4.9 oz)
- Diameter: 19 mm (0.75 in)
- Length: 147 mm (5.8 in)
- Cable drive capability: 100 m (328 ft)
- Temperature range: -40 C to 45 C (-40 F to 113 F)
- Relative Humidity (RH): Up to 90 %
Details
- Manufacturer: DPA Microphones
- MPN: MMP-A
- Model Number: MMP-A
- UPC: 5713055001667