Sennheiser MKH416-P48U3 Shotgun Microphone with Rode Blimp Bundle

Sennheiser MKH416-P48U3 Shotgun Microphone with Rode Blimp Windshield and Rycote Shock Mount Suspension System

Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone

Achieve superb audio capture in demanding conditions for your next professional film, TV, or location recording with the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone. Mix-ready sound quality is provided by its sharp directivity, low noise, and strong output. Plus, there are no controls to worry about; the MKH 416-P48U3 delivers the reliability you need for high-pressure gigs.

The microphone exhibits a hypercardioid polar pattern at low to midrange frequencies and transitions to a lobar pattern in high frequencies, allowing it to attenuate 125 Hz to 2 kHz by approximately 10 dB at the 90° off-axis points. Your dialogue, foley, and sound effects can be recorded with full dynamics and clarity, thanks to the MKH 416-P48U3's wide frequency response, enhanced consonant articulation, and high SPL handling.

Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones

The Blimp Windshield and Rycote Shock Mount Suspension System from Rode is designed to provide your shotgun microphone with protection from wind noise and isolation from shock and vibration. It fits the Rode NTG1, NTG2, NTG3, NTG4 and NTG4+ and any shotgun mic up to 12.75" in length.

The Blimp attaches to any standard boompole with the 3/8" thread attachment at the base. Housed inside the grip is a Mogami microphone cable which splits via a junction box to a flexible thin cable inside the Blimp, to minimize the transference of vibration to the microphone.

Dead Wombat windshield, caring brush and tail/patch cable are included.

Features:

• Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone
• Increased directivity due to interference tube principle
• Very low inherent self-noise
• High sensitivity
• Transformerless and fully floating balanced output
• Rugged, suitable for adverse climatic conditions
• Matt black all-metal body
• Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones
• Includes Dead Wombat windshield
• Includes caring brush
• Includes tail/patch cable

Specifications:

• Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone
• Dimensions: Ø 19 x 250 mm
• Frequency response (microphone): 40 - 20000 Hz
• Transducer principle (Microphone): RF condenser microphone
• Pick-up pattern: super-cardioid/lobar
• Sensitivity in free field, no load (1kHz): 25 mV/Pa +- 1 dB
• Nominal impedance: 25 Ω
• Min. terminating impedance: 800 Ω
• Equivalent noise level: 13 dB
• Equivalent noise level weighted as per CCIR 468-3: 24 dB
• Maximum sound pressure level (passiv): 130 dB
• Current consumption: 2 mA
• Voltage: 48 +- 4 V Phantom
• Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones
• Compatible Mic Diameter: 0.748 to 0.87" / 19 to 22 mm
• Inner Depth: 5" / 12.7 cm
• Outer Diameter: 5" / 125 mm
• Length: 19.3" / 490 mm
• Weight: 1.2 lb / 550 g
• Inputs: 1 x 3-Pin XLR Female
• Outputs: 1 x 3-Pin XLR Male
• Mounting Thread: 3/8"-16 Female

Includes:

• 1 x Sennheiser MKH416-P48 shotgun microphone
• 1 x Sennheiser MZW415 windshield
• 1 x Sennheiser MZQ100 microphone clamp
• 1 x Rode Blimp windshield