Rosco #5779 Fluorescent Paint (White, Matte, 1 Quart)

Rosco Fluorescent Paint Glows Vividly Under UV Lights - White - 1 Quart

Available in 9 brighter than normal colors which "glow" vividly under ultraviolet lights, Rosco Fluorescent Paints can create a wide range of exciting effects. They can be used to create special effects using ultraviolet black light or combined with other Rosco Scenic Paints to make the colors more vibrant. Fluorescents use the same high quality, water-base, vinyl acrylic binder found in Off Broadway Paints. It is suitable for use on most surfaces after the surface has been properly prepped.

Finish: Flat/Matte

Solvent: Water

Binder Type: Vinyl Acrylic

Dilution: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint and may reduce the brightness of the "glow."

Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.

Application: Stir contents well before use. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.

Film Thickness: 2 mil. dry film.

Coverage: Approximately 300 sq. ft. per gallon (28 sq. m. per 3.79L), depending on application method, substrate and thickness of the application.

Avg. Dry Time: At 75°F (24°C). Dries to the touch in 30-45 minutes. Can be recoated in 1-2 hours.

Clean-up: Soap and water.

Shelf Life: Minimum shelf life for unopened, sealed paint is approximately 24 months when stored in a temperature controlled location.

Packaging: Gallon, Quart and Pint Cans (3.79L, 0.946L and 0.473L).

Fluorescent pigments will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight where possible.

All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.

* Invisible Blue is a milky white paint that fluoresces to a pale blue under blacklight. When painted over light colored surfaces, Invisible Blue is difficult to detect. However, it can be seen when painted over dark or black colors.

Product Numbers

• 150 05779 0016: Fluorescent Paint White - Pint
• 150 05779 0032: Fluorescent Paint White - Quart
• 150 05779 0128: Fluorescent Paint White - Gallon
• 150 05780 0016: Fluorescent Paint Red - Pint
• 150 05780 0032: Fluorescent Paint Red - Quart
• 150 05780 0128: Fluorescent Paint Red - Gallon
• 150 05781 0016: Fluorescent Paint Orange - Pint
• 150 05781 0032: Fluorescent Paint Orange - Quart
• 150 05781 0128: Fluorescent Paint Orange - Gallon
• 150 05782 0016: Fluorescent Paint Yellow - Pint
• 150 05782 0032: Fluorescent Paint Yellow - Quart
• 150 05782 0128: Fluorescent Paint Yellow - Gallon
• 150 05783 0016: Fluorescent Paint Green - Pint
• 150 05783 0032: Fluorescent Paint Green - Quart
• 150 05783 0128: Fluorescent Paint Green - Gallon
• 150 05784 0016: Fluorescent Paint Blue - Pint
• 150 05784 0032: Fluorescent Paint Blue - Quart
• 150 05784 0128: Fluorescent Paint Blue - Gallon
• 150 05785 0016: Fluorescent Paint Invisible Blue* - Pint
• 150 05785 0032: Fluorescent Paint Invisible Blue* - Quart
• 150 05785 0128: Fluorescent Paint Invisible Blue* - Gallon
• 150 05786 0016: Fluorescent Paint Pink - Pint
• 150 05786 0032: Fluorescent Paint Pink - Quart
• 150 05786 0128: Fluorescent Paint Pink - Gallon
• 150 05787 0016: Fluorescent Paint Gold - Pint
• 150 05787 0032: Fluorescent Paint Gold - Quart
• 150 05787 0128: Fluorescent Paint Gold - Gallon
• 150 05700 0KIT: Fluorescent Paint Kit: 9-piece kit contains one ounce samples.