RDL STP-1 Universal Audio Attenuator 2 Channel

Universal Audio Attenuator - 2 Channel

The STP-1 is a pair of convenient attenuator pads that can be located at the precise location that attenuation is needed. The low-cost STP-1 eliminates the costly labor of figuring and assembling fixed pads. Multi-turn trimmers in the STP-1 permit precise adjustment of levels without the need to connect any jumpers or external resistors. The STP-1 operates in either high or low impedance, balanced or unbalanced circuits. The wiring legend is printed on the case for easy installation.

Features:

• Audio Level Attenuation
• Adjust Audio Level into Equipment
• Preset Audio Levels
• Precisely Match Audio Levels
• Increase Audio Input Headroom
• Two Adjustable Attenuators in One Package

Specifications:

• Nominal Impedance: HI-Z 10 kΩ; LO-Z 600 Ω
• Adjustment: Screwdriver trimming adjustment, 15 turns continuous
• Circuit Type: Passive modified H & T pads
• Connections: Terminal block accepts 14 to 24 guage wire; no lugs required; input/output connection legend located on STP-1
• Maximum Signal Inputs:
• HI-Z Balanced Line: +33 dBu, 35 V rms
• LO-Z Balanced Line: +27 dBu, 18 V rms
• HI-Z Unbalanced Line: +35 dBV, 45 V rms
• Reference Levels:Line level is +10 dBu to -10 dBu
• Mic level is -45 dBu to -65 dBu
• Power Requirement: Passive (not required)
• Ambient Operating Environment:-20 C to 60 C