RDL D-A2 Line Output Assembly on Decora Plate (White)

Line Output Assembly on Decora Wall Plate - RCA Jacks, Terminal Block - White/Gray Finish

The D-A2 / DS-A2 / RCX-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source. It may be connected to the +4 dBu line level output of any RDL product, even if that output is simultaneously feeding other equipment. The D-A2 / DS-A2 / RCX-A2 circuit design provides a high degree of audio isolation if a user accidentally feeds a consumer-level source into the D/DS/RCX-A2. The attenuation of such reverse signals is sufficient for most installations. Active RDL modules are available for complete isolation if required. The D-A2 / DS-A2 / RCX-A2 output jacks are transformer isolated from the balanced line input, and the input shield is separated from the case ground to reduce the possibility of induced hum. The D-A2 / DS-A2 / RCX-A2 is not intended as an audio input panel.

The D-A2 / DS-A2 / RCX-A2 fits directly into back boxes, available from RDL, to fit cabinets or US or international walls (RDL WB-1U). It may also be mounted directly into cabinets or most standard US single gang electrical boxes.

Features:

• Wall Mounted Consumer Level Outputs
• Single or Dual Outputs from Mono Source
• Gold Plated Phono Jack Outputs
• Transformer Isolation of the Line Outputs
• Unbalanced Audio Outputs from a Balanced Line Input
• High Attenuation of Reverse Signals

Specifications:

• Input Level: +4 dBu, nominal
• Input Connector: Full size barrier block
• Input Impedance: 10 kΩ balanced bridging, monaural
• Output Connectors (2): Phono jacks with gold contacts
• Input Connections (4): CASE GROUND, SHIELD, + , -
• Frequency Response: 50 Hz to 20 kHz (+/-1 dB)
• Attenuated Signal - Reverse Path: < -50 dB (at 150 Ω balanced source output, +4 dBu reference, -10 dBV signal injected into output jack)
• Power Requirement: Passive
• Dimensions: Height: 4.13 in. 10.49 cm; Width: 1.7 in. 4.32 cm; Depth: 2.15 in. 5.47 cm
• Mounting Box Req.: Width: 1.80 in. 4.57 cm; Depth: 1.75 in. 4.45 cm