Doug Fleenor DMX2MPX DMX to Microplex Converter

DMX to NSI Microplex Converter (DMX Console, Microplex Dimmers)

The DMX to Microplex interface is capable of converting DMX512 to Sunn, ETA, NSI, Lepercon or Lightronics versions of Microplex. Since each of these manufactures use unique timings, the DMX to Microplex interface provides jumpers to configure the Microplex output.

Common names for conversions the DMX2MPX is capable of handling.

DMX to LMX 64
DMX to LMX 128
DMX to Microplex
DMX to Multiplex
DMX to Ultraplex

Specifications:

• Input signal: 250 Kilobaud, 0.2 volts minimum, 12 volts maximum
• Input circuit: ESD protected EIA-485 transceiver (LT1785)
• Input connector: Gold plated 5 pin male (Neutrik D-1 series)
• Input pass through: Gold plated 5 pin female (Neutrik D-1 series)
• All five pins are passed through
• Option jumpers: INSTALLED REMOVED
• JP1 DMX times out in 1 second (Default) Hold last look
• JP2 64 Channel Output (Default) 128 Channel Output
• JP3 Fast Output (Default) Slow Output
• Output signal: FAST SLOW
• 64 Channel 70 Hertz Output 37 Hertz Output
• 128 Channel 38 Hertz Output 20 Hertz Output
• Output circuit: Hi-speed operational amplifier (LF347)
• Output connector: Gold plated 3 pin female (Neutrik D-1 series)
• Output Pinout:
• Pin 1 = common
• Pin 2 = N/C
• Pin 3 = signal
• Power input: 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional)
• Color:
• Top, bottom and sides: Silver hammer tone.
• Front and back: Black.
• Size and weight: 6.5" deep, 1.7" high, 6.5" wide, 2.7 pounds (19" rack adapter available)